We often compare installing Valiryo to hanging a mirror with built-in lighting in your bathroom. The process is straightforward: you fix the unit to the wall and connect it to the household power supply.
The main difference is that, in most homes, there isn’t usually a power point inside the shower area. This is precisele der Bereich ist whenever possible, as it provides the best body-drying experience. Until Valiryo was developed, there was simply no need to install electrical devices in wet bathroom areas, which is why the electrical connection can sometimes be the only extra step to consider. If Valiryo is installed outside the shower area, it can be connected just like any other household appliance.
Adding an electrical device inside the shower might seem unusual at first, but this is entirely normal and depends on the protection rating of the product. In this case, Valiryo features an IP56 protection rating, which certifies that it is safe to use even under direct water impact.
A simple installation, no renovation required
Installing Valiryo is a simple process and does not require renovating your bathroom. There’s no need to wait for a future remodel to enjoy all the benefits of body drying with Valiryo. Whenever you decide to install it, all that’s needed is to bring the electrical wiring to the chosen connection point. Once that is prepared, mounting the unit is quick and straightforward. Thanks to its simple design, the installation can even be carried out by the user, although professional installation is always recommended for the electrical connection.
Wie Körpertrockner anschließen und Valiryo im Badezimmer installieren
You’ll find the complete installation process explained step by step in the user manual included inside the box. In addition, the following video shows how Valiryo is installed inside the shower area, including the correct positioning of the unit. Please note that the electrical connection process is explained in separate post, as it varies depending on the country where you live. Valiryo must always be connected to 220–240V, and the connection requirements may differ internationally.
To make installation easier, a mounting template is included in the box. This template helps you mark the exact drilling points on the wall. As a general recommendation, Valiryo is installed 10 cm from the floor, although this distance can be adjusted to better suit your space and personal needs.
It’s also important not to install the unit too close to side walls. You should leave enough space on both sides of the column so the user can comfortably stand in front of it and turn around during the drying process.
Choosing the right column height
Bedenken wegen des Platzes? Wenn Sie nicht genug Platz haben, um unsere 218 cm hohe Säule zu installieren, keine Sorge – wir haben die Lösung! Unsere kürzere Säule passt in Räume mit einer Mindesthöhe von 197 cm. Es ist jedoch wichtig, einen Mindestabstand von 2 cm über dem Gerät zu lassen und die Höhe an die Person und den verfügbaren Raum anzupassen.
Hier ist eine kurze Anleitung zur Auswahl der richtigen Valiryo-Säule:
- Wählen Sie den richtigen Ort: Idealerweise sollte Valiryo in der Dusche installiert werden, um eine vollständige und zufriedenstellende Erfahrung zu garantieren.
- Messen Sie Ihre verfügbare Höhe:
- Wenn Sie 220 cm oder mehr Platz haben, empfehlen wir das Valiryo-Modell mit 218 cm.
- Wenn Sie weniger als 219 cm zur Verfügung haben, wählen Sie das Valiryo-Modell mit 195 cm, da das größere Modell nicht passen wird.
- Sollten Sie weniger als 197 cm Platz haben, kontaktieren Sie uns, um eine alternative Lösung für Ihre Situation zu finden.
To make sure you choose the right option, we always recommend carefully checking the available height before installation. You can find more detailed information in our installation guide, which explains all measurements and requirements in detail.
What’s included and installation tips
The Valiryo column is very lightweight, weighing only 9.8 kg. However, due to its size and volume, we recommend installing it with two people.
All the necessary installation materials are included inside the box. Before starting the installation, we strongly recommend checking the contents of the packaging to make sure all components are present.
In the video below, you can also see how Valiryo is delivered to your home. The product is shipped in two separate boxes: one containing the column and another with the motor housing, and all the elements you will need to install your Valiryo Body Dryer.
Even though installing Valiryo is a simple process, we understand that questions may come up along the way. Our team is always available to help you, clarify any doubts, and guide you through the installation whenever you need it. If you have any questions or would like additional support, don’t hesitate to contact us — we’ll be happy to assist you.